What did you prepare your mix with for that finish and what is it? 🙏🏻🤞🏼
Visualizar original
Ocultar original
@olveracarloswao In the mix I added colorant, black obsidian and recycled glass. For the finish, after the sealer I added clear enamel. ✨
Those white touches did the glass give you? was it just clear glass or white glass ?? I look very cute! Congratulations :)
@alexandergoecke_l Use bottles of Corona beer. ✨ Thank you very much! 💕
@marinth_16 hello congratulations, the pot is super good. How did you sand it, polish it?
Did you polish it with emery or by hand?
@luifer_garsal Hello! Thanks a lot! I sanded it down with a grinding stone cup. 😊
@eduardorodrigueznavarro4 With emery! 😊
Excuse me, how long did it take you sanding to show the finish on the glass? :)
@dal_damis To sand it I used the emery board and it was very fast, I think about 10 Min or less. ✨
What did you do your mlde with?
That Father!! congratulations
How nice that you were encouraged to use the emery with the stone, it effectively speeds up the work a lot.
Thanks for sharing your work : )
What material did you use to make your mold? Congratulations, it was very beautiful!
@rasta2376 @vichymc I used polypropylene to make the mold. (:
Very good job I congratulate you, the truth is, working with cement is a matter of taste and creativity. God bless you.
Hello, how are you, where do you buy polypropylene? Do you need a specific tool to make the mold? Thank you
16 comentários
displayname3519263
What did you prepare your mix with for that finish and what is it? 🙏🏻🤞🏼
Visualizar original
Ocultar original
displayname3230024
Plus@olveracarloswao In the mix I added colorant, black obsidian and recycled glass. For the finish, after the sealer I added clear enamel. ✨
Visualizar original
Ocultar original
displayname2625388
Those white touches did the glass give you? was it just clear glass or white glass ?? I look very cute! Congratulations :)
Visualizar original
Ocultar original
displayname3230024
Plus@alexandergoecke_l Use bottles of Corona beer. ✨ Thank you very much! 💕
Visualizar original
Ocultar original
displayname3283588
@marinth_16 hello congratulations, the pot is super good. How did you sand it, polish it?
Visualizar original
Ocultar original
displayname3334196
Did you polish it with emery or by hand?
Visualizar original
Ocultar original
displayname3230024
Plus@luifer_garsal Hello! Thanks a lot! I sanded it down with a grinding stone cup. 😊
Visualizar original
Ocultar original
displayname3230024
Plus@eduardorodrigueznavarro4 With emery! 😊
Visualizar original
Ocultar original
displayname2517649
Excuse me, how long did it take you sanding to show the finish on the glass? :)
Visualizar original
Ocultar original
displayname3230024
Plus@dal_damis To sand it I used the emery board and it was very fast, I think about 10 Min or less. ✨
Visualizar original
Ocultar original
displayname3674642
What did you do your mlde with?
Visualizar original
Ocultar original
displayname1395249
Professor PlusThat Father!! congratulations
How nice that you were encouraged to use the emery with the stone, it effectively speeds up the work a lot.
Thanks for sharing your work : )
Visualizar original
Ocultar original
displayname3482018
What material did you use to make your mold? Congratulations, it was very beautiful!
Visualizar original
Ocultar original
displayname3230024
Plus@rasta2376 @vichymc I used polypropylene to make the mold. (:
Visualizar original
Ocultar original
displayname3106264
Very good job I congratulate you, the truth is, working with cement is a matter of taste and creativity. God bless you.
Visualizar original
Ocultar original
displayname3404970
Hello, how are you, where do you buy polypropylene? Do you need a specific tool to make the mold? Thank you
Visualizar original
Ocultar original
Faça login ou cadastre-se Gratuitamente para comentar