Hello @cris_bre thank you very much for your comment. Look, I use Raysin from the Rayher brand and I applied a little more water to the mixture than normal because if I have a very thick mixture I have bubbles left and I tap the mold on all sides lifting it, I put that mold on a cardboard and I also gently tap it moving the cardboard and when I unmold it, I only sand it below, above it is not necessary unless the technique is used with the terrazzo (granite) that does have to be sanded. I wash the pieces, let them dry for two days and they are ready. Any other questions do not hesitate to write me. ;)
@snegueruela hello Susana. Thank you for your comments. Normally I tap the mold so that I don't have bubbles or little holes and in the case of the last photo, I only made the cast without tapping the mold. As for the colors, they are painted by hand, since since I used cement, it is very difficult to give the cement another color. If you use an acrylic resin that is not cement and that is normally white, if I use powder pigment but it is not two molds but rather you let the first layer of one color dry and then apply the second layer with the other color. If you want, look at my Instagram and you can also send me your doubts there. Instagram: happylivingarstudio
Hello, what you do is beautiful. Could you tell me how to make a mold in the shape of a boel, the marias show it but the mold is flat and if I want it hollow? Greetings and thanks for sharing 😃
7 comentarios
displayname6788978
I loved the course, I learned a lot and will continue to practice more to do other projects!
displayname2794103
Profesor PlusCamila! spectacular your result !!!! thanks for sharing it with us
displayname2153512
Precious!! I loved it, one question, what tool do you use to make everything well polished?
displayname6788978
Hello @cris_bre thank you very much for your comment. Look, I use Raysin from the Rayher brand and I applied a little more water to the mixture than normal because if I have a very thick mixture I have bubbles left and I tap the mold on all sides lifting it, I put that mold on a cardboard and I also gently tap it moving the cardboard and when I unmold it, I only sand it below, above it is not necessary unless the technique is used with the terrazzo (granite) that does have to be sanded. I wash the pieces, let them dry for two days and they are ready. Any other questions do not hesitate to write me. ;)
displayname6338357
I love your pieces!! Congratulations
I'm new to this and I have a lot of questions :-) I wanted to ask you a couple of things:
1) How do you get so many little holes, the last piece amazes me for that.
2) How do you pigment half so exactly? are they two molds?
A hug!!
Thank you,
Suzanne
displayname6788978
@snegueruela hello Susana. Thank you for your comments. Normally I tap the mold so that I don't have bubbles or little holes and in the case of the last photo, I only made the cast without tapping the mold. As for the colors, they are painted by hand, since since I used cement, it is very difficult to give the cement another color. If you use an acrylic resin that is not cement and that is normally white, if I use powder pigment but it is not two molds but rather you let the first layer of one color dry and then apply the second layer with the other color. If you want, look at my Instagram and you can also send me your doubts there. Instagram: happylivingarstudio
Regards, Camilla
displayname963840
Hello, what you do is beautiful. Could you tell me how to make a mold in the shape of a boel, the marias show it but the mold is flat and if I want it hollow? Greetings and thanks for sharing 😃
Entra o únete Gratis para comentar